Cloverdale Paint makes an assortment of primers and sealers to deal with a variety of substrates and application issues, please see the sub-categories below to direct you to the right primer for your project.
Master Painter Latex Drywall Primer is a professional interior drywall primer/undercoat for use on new drywall, interior masonry surfaces, and to prime patching compounds used with wall repairs prior to repainting. Best suited for use under latex and acrylic finish coats. Formulated to provide a combination of good hiding and sanding characteristics at a value price.
• For use on new drywall, interior masonry surfaces, and to prime patching compounds used with wall repairs prior to repainting. May be used under latex and oil base finish coats.
A premium latex primer/sealer for use on new drywall, interior masonry surfaces and to prime patching compounds used with wall repairs prior to repainting. This product is a superior performing, higher hiding, Vinyl-Acrylic latex sealer with excellent sanding properties. NOTE: Tint one-half strength to approximate finish coat colour. Meets Environment Canada's VOC content regulations for Architictural and Industrial Maintenance Coatings under the "Primer" classification.
• For use as a sealer on new drywall, interior masonry surfaces, and to prime patching compounds used with wall repairs prior to repainting.
• May be used under latex and oil base finish coats. Use as a sealer on drywall and masonry interior surfaces for both "cut-in" and general use.
A premium interior/exterior acrylic latex primer/undercoat for use on new or previously painted woodwork and siding. Provides excellent adhesion to moderately chalky surfaces. May also be used to seal stucco and masonry and to prime galvanized metal. This product provides optimum sealing, excellent adhesion, resistance to peeling and cracking with maximum hiding. Meets Environment Canada Volatile Organic Compounds in Consumer and Commerical Products regulations for primers and sealers. Approved by the Master Painter's Institute under category # 6, 39 & 137.
• Excellent adhesion to moderately chalky surfaces.
• Provides optimum sealing, resistance to peeling and cracking with maximum hiding
• Good application properties by brush roller or spray
• Good low temperature tolerance and can be applied as low as 5°C
• Alkali resistant
Prime Solution premium interior / exterior alkyd (oil base) primer is designed for use on new or previously painted woodwork and siding including plywood, particle boards, oriented strand board and dimensional lumber. It is formulated to prevent staining and tannin bleeding on painted woods such as Redwood and Cedar. It provides optimum sealing, stain blocking, adhesion and holdout properties. It resists peeling, cracking, mildew and provides an excellent base for subsequent top coating. Approved by the Master Painter's Institute under category #5 and meets Environment Canada's VOC limits under Category #37.
• Formulated to prevent staining and tannin bleeding on painted woods such as Redwood and Cedar.
• It provides optimum sealing, stain blocking, adhesion and holdout properties.
• It resists peeling, cracking, mildew and provides an excellent base for subsequent top coating.
Prime Solution Exterior Alkali Resistant Primer is a water-based, pure acrylic primer intended for use on "hot" masonry or plaster surfaces to minimize discoloration caused by alkali burning. The product features high brightness and coverage properties, is compatible with a wide range of architectural topcoats, and meets relevant VOC emission targets. This product is approved by Master Painters Institute under Category #3.
Prime Solution Interior / Exterior Waterborne Acrylic Speed Primer is the ultimate in high adhesion, and carries much lower odour than conventional quick-drying primers for use on hard, non porous surfaces. This product features high hiding properties and is ideal where drastic colour change is required. Approved under the Master Painter's Institute under category #17.
• Excellent adhesion, high hiding properties
• Easy application, good build properties
• Low odour, low VOC's
• 100% acrylic resins
• Quick dry, early topcoat
• Good topcoat compatibility
• Excellent "bonding" primer
Copyright © 2021 The Paint Shack - All Rights Reserved.